Technical divers who subscribe to the DIR (Doing It Right) approach to streamlined and minimalistic equipment configurations will appreciate SCUBAPRO’s new S-Tek Pure back plate/wing system. This simple yet rugged system consists of a continuous-web harness teamed with a revolutionary designed 3D formed stainless steel back plate and a donut wing. Stainless steel hardware includes a waist buckle, two pre-bent D-rings on the shoulders, one D-ring on the waist, and two D-rings on the crotch strap. The stainless steel backplate comes with Evo-Angle webbing slots for a more natural webbing routing that increases comfort and reduces webbing abrasion. The backplate also provides trim weight system mounting holes, an argon tank mounting point for drysuit divers, a Monprene® pad for comfort, 2 x S-Tek Ergo Nuts, plus a convenient built-in carry handle. The system is available with either a 30-, 40- or 60-pound-lift donut wing, with the 30 and 40 wings being suitable for single tank diving and the 40 and 60 wings for twin tank diving. The 30-pound system includes an aluminum single tank adapter. The S-Tek Pure is a rugged and reliable tech diving system designed for those extended trips into the depths.
S TEK Donut Wing 30 + S-Tek PURE Harness SS + STA
• Continuous webbing harness provides a custom, individualized fit.
• Can be configured as a fixed-shoulder length harness for ultimate simplicity or in Extender mode that allows the shoulder straps to extend for easier doffing & donning.
• Stainless steel waist buckle allows for a full range of adjustment.
• Two pre-bent D-rings on the shoulders, one D-ring on the waist, and two D-rings on the crotch strap are provided for clipping on extra gear.
• Branded silicone epaulet on the left shoulder and branded silicone guide bands keep inflator hose in place and straps in place.
• Stainless steel back plate offers Evo-Angle webbing slots plus mounting points for trim weights, an argon tank for drysuit divers, plus a convenient built-in carry handle.
• 2 x S-Tek Ergo Nuts are ergonomically designed, easier to tighten and loosen, and flushed mounted to prevent abrasion.
• Donut wing (30lbs, 40lbs or 60lbs) is constructed of a 1000D Cordura outer shell and 500D Cordura inner bladder.
• Aluminum single tank adapter is included with the 30lb system.
• Back plate features fully radiused edges and a softened organic shape, along with the back plate’s recessed wingnut socket, rationalized hole count and positioning, and webbing bolt hole alignment increase diver comfort & make for a smart design.